9 December 2023
New forging production line installed
The brand-new world-leading forging production line was successfully installed, providing more precise and consistent forging quality across our product range.
30+Years manufacturing experience
Flat-OctIconic shank design
ISO 9001Certified · SEDEX member
OEM READYPrivate label & own brand
Featured Products
Built for the job that breaks lesser tools
Flagship Tough Bull bars and heavy-duty scrapers — engineered Flat-Oct performance for contractors and distributors.
Core Series
T1 Wrecking Bars
1045 carbon steel. Everyday professional demolition. Flat-Oct shank for max leverage without the weight.
View T1 series →Core Series
T2 Wrecking Bars
Chrome alloy steel. Higher load capacity — up to 1.75× traditional bars at the same weight.
View T2 series →
PRO Series
T3 PRO Bars
CrV chrome vanadium. Striking area for hammer work. Maximum strength for the toughest jobs.
View T3 series →
Flat Shank
Heavy Duty Flat Pry Bar
CrV forged flat pry with strike zone, textured grip, and multi-angle nail slots.
View flat pry bar →
Specialty
S1a Heavy-Duty Scrapers
Replaceable knife & teeth blades. Tubular handle with dual soft grips. Built for floor and surface demo.
View scrapers →Engineered Advantage
Why the Flat-Oct design wins on the job
Flat-Oct shank. Heat-treated beyond ANSI. 1045, alloy, and CrV steel. ISO 9001 and SEDEX certified. The engineering reasons contractors and distributors choose Tough Bull.
•
Flat-Oct profile shank
Maximum leverage with lighter material — thicker in the bending direction, wider profile to resist rolling.
•
Full curved blade fulcrum
Curved blade acts as a fulcrum to maximize lifting power. Continuous rolling lift with less effort.
•
Wide blade, no side-roll
Extra-wide blade protects base material and prevents the bar from rolling sideways during use.
•
Low-profile sharp entry
Sharp, low-profile blade goes into narrower gaps. Long claw ends reach deeper under lifted objects.
•
Precision nail slot
Machined nail slot on the claw pulls nails cleanly with less damage to surrounding material.
•
Powder-coat durability
Anti-rust protection, long service life, and high visibility on the job site.
•
Striking area (PRO series)
T3 PRO bars include a designed striking surface so the blade can be driven into tight gaps with a hammer.
•
Built for every demolition task
Lifting, cutting, chopping, removing, splitting — one professional bar for the full range of work.
Tough Bull for Tough Jobs.
Source professional-grade bars for your distribution network or private-label program.
Contact SalesTough Bull Bars — Core Series
Iconic Flat-Oct engineered wrecking bars
Core Series
T1a Wrecking Bar
Flat-Oct iconic — max leverage, lighter material
View specifications →
Core Series
T1b Wrecking Bar
Flat-Oct with extended claw geometry
View specifications →Core Series
T2a Wrecking Bar
Chrome alloy Flat-Oct — up to 1.75× traditional load capacity
View specifications →Core Series
T2b Wrecking Bar
Chrome alloy Flat-Oct with extended claw reach
View specifications →PRO Series
CrV construction for professional demolition
PRO Series
T3a Wrecking Bar
CrV PRO bar with dedicated striking area
View specifications →Hex Shank Wrecking Bars
Traditional hex pattern for control and strength
Hex Shank
Gooseneck Wrecking Bar
Hex shank gooseneck for tight-access prying
View specifications →
Hex Shank
European Wrecking Bar
European pattern hex shank
View specifications →
Hex Shank
Base Board Molding Pry Bar
Precision pry for baseboard and moulding
View specifications →Oct & Flat Shank
Specialty shank profiles
Oct Shank
Scandinavian Wrecking Bar
Oct shank Scandinavian pattern
View specifications →
Flat Shank
Flat Utility Bar
Flat shank multi-purpose utility bar
View specifications →Flat Shank
Heavy Duty Flat Pry Bar
CrV forged flat pry bar with strike zone and multi-nail slots
View specifications →Oval & I-Beam Heavy Duty
High load capacity demolition bars
Oval Shank
Heavy Duty — Oval Shank
Oval shank, sizes 14" to 48"
View specifications →
I-Beam Shank
Heavy Duty — I-Beam Shank
I-beam strength without excess weight
View specifications →Full Forged Moulding Bars
Forged nail pullers and moulding tools
Full Forged
Moulding Bar — Forged Nail Puller
Thin-claw moulding and nail removal
View specifications →
Full Forged
Claw Moulding Bar
Wide head, wall-safe prying
View specifications →Scrapers
Heavy-duty site scrapers
Scrapers
S1a Scrapers
Knife & teeth blade, replaceable, tubular handle
View specifications →
← Back to Products
Core Series
T1a Wrecking Bar
Iconic Flat-Oct wrecking bar — max leverage, lighter material
Features
- Tough Bull iconic Flat-Oct profile shank provides max leverage with lighter material
- Full curved blade profile acts as fulcrum to maximize lifting power
- Curved angle for easy leverage and continuous rolling lifting
- Wide blade protects base material and avoids side rolling
- Low profile sharp blade enters narrower gaps
- Long claw-ends go deeper under lifted objects
- Nail slot for pulling nails with ease
- Powder coating for durability, anti-rust and jobsite visibility
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load Nail End | Load Chisel End | Weight |
|---|---|---|---|---|---|---|---|
| T1a12 | 12" (305mm) | 20×11mm | 1045 Carbon | Two Ends | 180kg (440N·m) | 180kg (440N·m) | 0.50kg |
| T1a15 | 15" (380mm) | 20×11mm | 1045 Carbon | Two Ends | 140kg (440N·m) | 140kg (440N·m) | 0.62kg |
| T1a18 | 18" (455mm) | 20×11mm | 1045 Carbon | Two Ends | 115kg (440N·m) | 115kg (440N·m) | 0.75kg |
| T1a24 | 24" (610mm) | 22×14mm | 1045 Carbon | Two Ends | 130kg (650N·m) | 130kg (650N·m) | 1.37kg |
| T1a30 | 30" (760mm) | 22×14mm | 1045 Carbon | Two Ends | 100kg (650N·m) | 100kg (650N·m) | 1.70kg |
| T1a36 | 36" (915mm) | 22×14mm | 1045 Carbon | Two Ends | 82kg (650N·m) | 82kg (650N·m) | 2.04kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Core Series
T1b Wrecking Bar
Flat-Oct series with extended claw geometry
Features
- Iconic Flat-Oct shank — max leverage, lighter weight vs traditional hex
- Full curved blade as fulcrum for maximum lift
- Wide blade protects surfaces and resists side roll
- Long claw-ends for deeper reach under loads
- Nail slot for efficient nail pulling
- Powder-coated finish — durable and easy to spot
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load Nail End | Load Chisel End | Weight |
|---|---|---|---|---|---|---|---|
| T1b12 | 12" (305mm) | 20×11mm | 1045 Carbon | Two Ends | 180kg (440N·m) | 180kg (440N·m) | 0.53kg |
| T1b15 | 15" (380mm) | 20×11mm | 1045 Carbon | Two Ends | 140kg (440N·m) | 140kg (440N·m) | 0.63kg |
| T1b18 | 18" (455mm) | 20×11mm | 1045 Carbon | Two Ends | 115kg (440N·m) | 115kg (440N·m) | 0.77kg |
| T1b24 | 24" (610mm) | 22×14mm | 1045 Carbon | Two Ends | 130kg (650N·m) | 130kg (650N·m) | 1.42kg |
| T1b30 | 30" (760mm) | 22×14mm | 1045 Carbon | Two Ends | 100kg (650N·m) | 100kg (650N·m) | 1.75kg |
| T1b36 | 36" (915mm) | 22×14mm | 1045 Carbon | Two Ends | 82kg (650N·m) | 82kg (650N·m) | 2.08kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Core Series
T2a Wrecking Bar
Chrome alloy Flat-Oct — up to 1.75× traditional load capacity
Features
- Engineered Flat-Oct profile for strength-to-weight advantage
- Curved blade geometry for continuous rolling lift
- Wide blade protects base materials
- Hardened working ends beyond typical use loads
- Powder coating for site durability
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load Nail End | Load Chisel End | Weight |
|---|---|---|---|---|---|---|---|
| T2a12 | 12" (305mm) | 22×11mm | Chrome Alloy | Two Ends | 270kg (640N·m) | 270kg (640N·m) | 0.55kg |
| T2a16 | 16" (406mm) | 22×11mm | Chrome Alloy | Two Ends | 185kg (640N·m) | 185kg (640N·m) | 0.70kg |
| T2a20 | 20" (508mm) | 22×11mm | Chrome Alloy | Two Ends | 145kg (640N·m) | 145kg (640N·m) | 0.86kg |
| T2a24 | 24" (610mm) | 22×11mm | Chrome Alloy | Two Ends | 118kg (640N·m) | 118kg (640N·m) | 1.03kg |
| T2a24b | 24" (610mm) | 26×13mm | Chrome Alloy | Two Ends | 180kg (980N·m) | 180kg (980N·m) | 1.47kg |
| T2a30 | 30" (760mm) | 26×13mm | Chrome Alloy | Two Ends | 140kg (980N·m) | 140kg (980N·m) | 1.84kg |
| T2a36 | 36" (915mm) | 26×13mm | Chrome Alloy | Two Ends | 115kg (980N·m) | 115kg (980N·m) | 2.23kg |
| T2a42 | 42" (1065mm) | 28×15mm | Chrome Alloy | Two Ends | 125kg (1220N·m) | 125kg (1220N·m) | 3.20kg |
| T2a48 | 48" (1220mm) | 28×15mm | Chrome Alloy | Two Ends | 110kg (1220N·m) | 110kg (1220N·m) | 3.66kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Core Series
T2b Wrecking Bar
Chrome alloy Flat-Oct with extended claw reach
Features
- Flat-Oct shank for max leverage at lower weight
- Extended claw reach for deeper prying
- Wide blade surface for controlled lift
- Dual-end hardening for long service life
- High-visibility powder coat
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load Nail End | Load Chisel End | Weight |
|---|---|---|---|---|---|---|---|
| T2b12 | 12" (305mm) | 22×11mm | Chrome Alloy | Two Ends | 270kg (640N·m) | 270kg (640N·m) | 0.60kg |
| T2b16 | 16" (406mm) | 22×11mm | Chrome Alloy | Two Ends | 185kg (640N·m) | 185kg (640N·m) | 0.75kg |
| T2b20 | 20" (508mm) | 22×11mm | Chrome Alloy | Two Ends | 145kg (640N·m) | 145kg (640N·m) | 0.91kg |
| T2b24 | 24" (610mm) | 22×11mm | Chrome Alloy | Two Ends | 118kg (640N·m) | 118kg (640N·m) | 1.08kg |
| T2b24b | 24" (610mm) | 26×13mm | Chrome Alloy | Two Ends | 180kg (980N·m) | 180kg (980N·m) | 1.55kg |
| T2b30 | 30" (760mm) | 26×13mm | Chrome Alloy | Two Ends | 140kg (980N·m) | 140kg (980N·m) | 1.92kg |
| T2b36 | 36" (915mm) | 26×13mm | Chrome Alloy | Two Ends | 115kg (980N·m) | 115kg (980N·m) | 2.31kg |
| T2b42 | 42" (1065mm) | 28×15mm | Chrome Alloy | Two Ends | 125kg (1220N·m) | 125kg (1220N·m) | 2.29kg |
| T2b48 | 48" (1220mm) | 28×15mm | Chrome Alloy | Two Ends | 110kg (1220N·m) | 110kg (1220N·m) | 3.76kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
PRO Series
T3a Wrecking Bar
CrV PRO bar with dedicated striking area
Features
- Chrome vanadium (CrV) construction for PRO-grade toughness
- Dedicated striking area for controlled impact work
- Flat-Oct geometry for leverage without excess weight
- Hardened ends for extended life on demolition sites
- Powder-coated finish for durability and visibility
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load Nail End | Load Chisel End | Weight |
|---|---|---|---|---|---|---|---|
| T3a15 | 15" (380mm) | 21×12mm | CrV Steel | Full Length | 170kg (550N·m) | 210kg (670N·m) | 0.75kg |
| T3a20 | 20" (505mm) | 21×12mm | CrV Steel | Full Length | 205kg (920N·m) | 160kg (705N·m) | 1.12kg |
| T3a24 | 24" (610mm) | 21×12mm | CrV Steel | Full Length | 170kg (920N·m) | 130kg (705N·m) | 1.31kg |
| T3a30 | 30" (760mm) | 25×14mm | CrV Steel | Full Length | 185kg (1250N·m) | 160kg (1100N·m) | 2.12kg |
| T3a36 | 36" (915mm) | 25×14mm | CrV Steel | Full Length | 150kg (1250N·m) | 135kg (1100N·m) | 2.51kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Specialty
Gooseneck Wrecking Bar - Hex Shank
Hex shank gooseneck for tight-access prying
Features
- Gooseneck profile for confined spaces
- Hex shank for traditional grip and strength
- Hardened working ends
- Built for professional demolition and pry work
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load Nail End | Load Chisel End | Weight |
|---|---|---|---|---|---|---|---|
| 02071 | 12" (300mm) | 1/2" (13mm) | 1045 Carbon | Two Ends | 90kg (210N·m) | 90kg (210N·m) | 0.40kg |
| 02072 | 18" (450mm) | 5/8" (16mm) | 1045 Carbon | Two Ends | 95kg (360N·m) | 95kg (360N·m) | 0.85kg |
| 02073 | 24" (600mm) | 3/4" (19mm) | 1045 Carbon | Two Ends | 110kg (570N·m) | 110kg (570N·m) | 1.66kg |
| 02074 | 30" (750mm) | 3/4" (19mm) | 1045 Carbon | Two Ends | 86kg (570N·m) | 86kg (570N·m) | 1.98kg |
| 02075 | 36" (900mm) | 3/4" (19mm) | 1045 Carbon | Two Ends | 75kg (570N·m) | 75kg (570N·m) | 2.37kg |
| 02076 | 48" (1200mm) | 3/4" (19mm) | 1045 Carbon | Two Ends | 55kg (570N·m) | 55kg (570N·m) | 3.09kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Specialty
European Wrecking Bar - Hex Shank
European pattern hex shank wrecking bar
Features
- European pattern geometry
- Hex shank construction
- Hardened ends for high load cycles
- Professional contractor grade
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load Nail End | Load Chisel End | Weight |
|---|---|---|---|---|---|---|---|
| 02182 | 300×13 | 13mm | 1045 Carbon | Two Ends | 100kg (235N·m) | 90kg (210N·m) | 0.38kg |
| 02183 | 450×16 | 16mm | 1045 Carbon | Two Ends | 105kg (395N·m) | 95kg (360N·m) | 0.82kg |
| 02199 | 500×16 | 16mm | 1045 Carbon | Two Ends | 90kg (395N·m) | 80kg (360N·m) | 0.92kg |
| 02184 | 600×16 | 16mm | 1045 Carbon | Two Ends | 80kg (395N·m) | 70kg (360N·m) | 1.04kg |
| 02189 | 500×18 | 18mm | 1045 Carbon | Two Ends | 135kg (560N·m) | 120kg (540N·m) | 1.21kg |
| 02190 | 600×18 | 18mm | 1045 Carbon | Two Ends | 110kg (560N·m) | 100kg (540N·m) | 1.38kg |
| 02191 | 700×18 | 18mm | 1045 Carbon | Two Ends | 92kg (560N·m) | 85kg (540N·m) | 1.67kg |
| 02192 | 800×18 | 18mm | 1045 Carbon | Two Ends | 80kg (560N·m) | 75kg (540N·m) | 1.85kg |
| 02193 | 1000×18 | 18mm | 1045 Carbon | Two Ends | 65kg (560N·m) | 60kg (540N·m) | 2.31kg |
| 02196 | 1000×20 | 20mm | 1045 Carbon | Two Ends | 75kg (680N·m) | 70kg (660N·m) | 2.78kg |
| 02197 | 1200×20 | 20mm | 1045 Carbon | Two Ends | 65kg (680N·m) | 60kg (660N·m) | 3.33kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Specialty
Base Board Molding Pry Bar - Hex Shank
Precision pry bar for baseboard and moulding
Features
- Designed for baseboard and moulding removal
- Hex shank control and strength
- Thin profile for finished-surface work
- Minimizes damage to surrounding material
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Weight |
|---|---|---|---|---|---|
| — | Multiple | Hex | 1045 Carbon | Two Ends | — |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Specialty
Scandinavian Wrecking Bar - Oct Shank
Oct shank Scandinavian pattern bar
Features
- Scandinavian pattern geometry
- Octagonal shank for grip and strength
- Hardened working ends
- Heavy-duty demolition ready
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Weight |
|---|---|---|---|---|---|
| — | Multiple | Oct | 1045 Carbon | Two Ends | — |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Specialty
Flat Utility Bar
Flat shank multi-purpose utility bar
Features
- Flat shank for versatile utility work
- Ideal for general pry and scrape tasks
- Hardened ends
- Compact professional profile
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Weight |
|---|---|---|---|---|---|
| — | Multiple | Flat | 1045 Carbon | Two Ends | — |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Flat Shank · New
Heavy Duty Flat Pry Bar
CrV forged flat pry bar with strike zone, textured grip, and multi-angle nail slots.
Features
- One piece forged from CrV Steel with extra strength and durability
- Wide and sharp tips allow the claw to be driven into narrow gaps
- 3 beveled nail slots for easy prying and access to nails at tough angles
- Textured groove body and side finger grip resist hand slipping
- Strike zone for controlled impact work
- Full-length heat treatment for long service life
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load Nail End | Load Chisel End | Weight |
|---|---|---|---|---|---|---|---|
| 02169 | 15" (380mm) | 35 × 7 mm | CrV Steel | Full Length | 120kg (396N·m) | 120kg (396N·m) | 0.715kg |
* Load values based on Tough Bull in-house testing. Contact us for OEM options and full size runs.
← Back to Products
Specialty
Heavy Duty Wrecking Bar - Oval Shank
Oval shank heavy-duty wrecking bar
Features
- Oval shank for high load capacity
- Sizes from 14" to 48"
- 1045 carbon steel, dual-end hardened
- Built for heavy demolition loads
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load (both ends) | Weight |
|---|---|---|---|---|---|---|
| 02001 | 14" (355mm) | 22×12mm | 1045 Carbon | Two Ends | 160kg (470N·m) | 0.68kg |
| 02002 | 18" (455mm) | 30×16mm | 1045 Carbon | Two Ends | 350kg (1400N·m) | 1.63kg |
| 02003 | 24" (610mm) | 30×16mm | 1045 Carbon | Two Ends | 260kg (1400N·m) | 1.99kg |
| 02004 | 30" (760mm) | 30×16mm | 1045 Carbon | Two Ends | 200kg (1400N·m) | 2.53kg |
| 02005 | 36" (910mm) | 30×16mm | 1045 Carbon | Two Ends | 166kg (1400N·m) | 3.02kg |
| 02006 | 48" (1220mm) | 30×16mm | 1045 Carbon | Two Ends | 120kg (1400N·m) | 3.99kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Specialty
Heavy Duty Wrecking Bar - I Beam Shank
I-beam shank — strength without excess weight
Features
- I-beam shaft provides strength without adding weight
- Sizes from 14" to 48"
- 1045 carbon steel, dual-end hardened
- Heavy demolition and lift applications
Specifications
| Art. No. | Length | Shank Size | Material | Hardening | Load (both ends) | Weight |
|---|---|---|---|---|---|---|
| 02019 | 14" (355mm) | 22×13mm | 1045 Carbon | Two Ends | 160kg (470N·m) | 0.69kg |
| 02020 | 18" (455mm) | 22×13mm | 1045 Carbon | Two Ends | 120kg (470N·m) | 0.85kg |
| 02021 | 24" (610mm) | 30×17mm | 1045 Carbon | Two Ends | 260kg (1400N·m) | 1.97kg |
| 02022 | 30" (760mm) | 30×17mm | 1045 Carbon | Two Ends | 200kg (1400N·m) | 2.49kg |
| 02023 | 36" (910mm) | 30×17mm | 1045 Carbon | Two Ends | 166kg (1400N·m) | 2.98kg |
| 02024 | 48" (1220mm) | 30×17mm | 1045 Carbon | Two Ends | 120kg (1400N·m) | 3.87kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Specialty
Moulding Bar - Forged Nail Puller
Forged bar for moulding and nail pulling
Features
- Ideal for removing nails and moulding
- Precision thin-claw design for hard-to-reach places
- I-beam shaft — strength without extra weight
- Heat-treated and forged steel for durability
- Minimal wood damage profile
Specifications
| Art. No. | Length | Shank | Material | Hardening | Weight |
|---|---|---|---|---|---|
| 02261 | 10" | Forged | 1045 Carbon | Full Length | 0.30kg (0.67lb) |
| 02262 | 12" | Forged | 1045 Carbon | Full Length | 0.55kg (1.2lb) |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Specialty
Claw Moulding Bar - Forged Nail Puller
Claw moulding bar with wide strike surface
Features
- Extra-wide head helps prevent wall damage
- Wide strike surface for accurate nail and trim work
- I-beam shaft strength without excess weight
- Heat-treated and forged steel
Specifications
| Art. No. | Length | Shank | Material | Hardening | Weight |
|---|---|---|---|---|---|
| 02263 | 8" | Forged | 1045 Carbon | Full Length | 0.23kg (0.5lb) |
| 02264 | 10" | Forged | 1045 Carbon | Full Length | 0.36kg (0.8lb) |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
← Back to Products
Specialty
S1a Scrapers
Heavy-duty scraper — knife & teeth blade
Features
- Super strong heavy-duty scraper with knife and teeth blade
- Thick blade for cutting, scraping and staple removing
- Heavy-duty tubular steel handle with 2 soft grips
- Quick replaceable blade with bolts & hex key
- For concrete, marble, ceramic, vinyl, carpet tiles and more
- Powder coating — durable anti-rust finish
Specifications
| Art. No. | Length | Handle | Material | Grip | Blade | Weight |
|---|---|---|---|---|---|---|
| S1a | 1550mm | 1440×29mm | Carbon Steel | 2 soft grip | 100mm Knife&Teeth | 2.3kg |
| S1a100 (blade) | — | — | Carbon Steel | — | 100mm Knife&Teeth | 0.22kg |
| S1a175 (blade) | — | — | Carbon Steel | — | 175mm Knife | 0.31kg |
* Load values based on Tough Bull in-house testing. Specs may vary by production lot. Contact us for OEM options and full size runs.
The Tough Bull Difference
What sets us apart
Proven performance, consistent quality, and structural advantages for distributors and OEM partners.
Professional-Grade Quality
Forged from 1045 carbon steel, chrome alloy, or CrV steel. Heat-treated in-house to exceed ANSI standards. Powder-coated for durability and jobsite visibility.
Proven Market Track Record
More than two decades supplying European retailers and industrial distributors. Former high-volume OEM partner for Gorilla Bar and Roughneck.
Competitive Landed Cost
Manufactured in Thailand. U.S. importers avoid heavy anti-dumping duties on Chinese-origin heavy forged hand tools.
Core engineering sales points
Flat-Oct shank — max leverage with lighter material; resists rolling
Curved blade fulcrum — continuous rolling lift, higher lifting power
Wide blade — protects base material, prevents side-roll
Low-profile entry — sharp blade into narrow gaps; long claws dig deeper
Precision nail slot — clean nail pulls with less material damage
Powder coat finish — anti-rust, durable, easy to spot on site
In-house heat treatment — strength and life beyond ANSI
ISO 9001 + SEDEX — certified quality and responsible supply chain
ISO 9001Quality management certified
SEDEXResponsible supply chain member
Thailand originU.S. anti-dumping advantage
In-house QCForging & heat treatment controlled
Own Brand – Tough Bull
For distributors, wholesalers, and chain stores looking for a differentiated professional line.
- Iconic T1 / T2 / T3 Flat-Oct designs
- Strong European reference base
- Competitive FOB pricing
- Marketing support & sell sheets
- Stable long-term supply
OEM & Private Label
For established brands and retailers seeking high-quality, tariff-advantaged production. Strong R&D develops products to your requirements.
- Proven OEM experience (Gorilla Bar, Roughneck heritage)
- Custom packaging & branding
- Volume flexibility
- Clear channel protection options
- Full in-house quality control
Ready to discuss a program? Contact sales →
Manufacturing Transparency
From steel to job site
Process videos show our forging line, heat treatment, finishing, and quality control — the same capability that supplied leading European brands for decades.
▶
Forging lineWorld-class forging production
Brand-new forging line (Dec 2023) delivers precise, consistent forging quality across the full Tough Bull range.
▶
Heat treatmentIn-house heat treatment
Controlled hardening for strength and service life that meets or exceeds ANSI standards.
▶
Finishing & QCFinishing and quality control
Powder coating, dimensional checks, and load testing before shipment. Every critical step under our roof.
▶
Factory overviewThailand facility overview
Modern plant in Samut Sakhon — solar-powered production, full process control, capacity for OEM and branded volume.
Ready for your footage. Replace placeholders with production videos (YouTube or hosted). Recommended: 60–90 second clips of forging, heat treatment, QC, and a short factory walk-through.
Own-Brand Retail
Online store for Tough Bull
As more contractors and serious DIYers shop online, a direct retail channel supports brand awareness and captures demand that never reaches a distributor counter.
Wholesale and OEM partners remain the core of the business. Retail is structured so it does not undercut authorized distributors.
Store link ready
Tough Bull Online
Connect your Amazon storefront, brand.com shop, or marketplace listing here.
Visit Online Store →For end users
Contractors and DIYers can purchase Tough Bull branded bars online when the retail store is live.
For distributors
Volume buyers should continue through wholesale and OEM programs. Contact sales for catalog pricing.
Company
Tacland (Thailand) Co., Ltd.
Tacland (Thailand) Co., Ltd. operates advanced production facilities to manufacture top-quality wrecking bars, pry bars, crow bars, digging bars, cold chisels, brick chisels, punches, tyre levers, garden tools and agricultural tools. Strong reputation in the EU, North America and other markets for professional and high-end DIY use.
With a strong R&D team and deep know-how, we manufacture for OEMs under private brands and develop specific products based on customer requirements. Forging, heat treatment and finishing are controlled in-house.
We are a SEDEX member and certified to ISO 9001.
ISO 9001
SEDEX Member
Made in Thailand
30+Years experience
ISO 9001Quality certified
SEDEXMember
OEM& Branded supply
Facility highlights
- New world-leading forging production line (Dec 2023)
- 280 kW + 110 kW solar capacity
- In-house heat treatment and quality control
18 November 2023
110 kW solar panels online
An additional 110 kW of solar panels were successfully installed to supply more green power and further reduce carbon emissions.
20 May 2021
280 kW solar installation completed
280 kW of solar panels were successfully installed to provide green power and reduce the carbon footprint of manufacturing.
Get in touch
Tell us your target sizes, annual volume, and whether you need Tough Bull branded product or a private-label program.
Email
tac@tacland.net
Telephone
+66 090 983 1510
Company
Tacland (Thailand) Co., Ltd.
Factory address
9/38 Moo 4, Bang Krachao Subdistrict
Mueang Samut Sakhon District
Samut Sakhon Province, Thailand
Mueang Samut Sakhon District
Samut Sakhon Province, Thailand
What to include
- Product models or categories of interest
- Target sizes and approximate annual volume
- Branded Tough Bull or private-label / OEM
- Destination market (e.g. U.S., EU, other)
Also available
Pry bars, crow bars, digging bars, cold chisels, brick chisels, punches, tyre levers, garden and agricultural tools.